Datasheet

3-349-347-03
4/8.14
METRISO 5024
Insulation and Resistance Measuring Instrument
with Voltage Measuring Range
GMC-I Messtechnik GmbH
Features
Nominal Voltages: 100 V, 250 V and 500 V
The instrument is suitable for the measurement of insulation
resistance at voltage-free devices and equipment with nominal
voltages of up to 500 V.
Low-Resistance Measurement: 0 ... 4 Ω
Low-resistance measurement is performed in accordance with
VDE 0413, part 4. It is used for testing resistance at ground
cables, protective conductors and equipotential bonding
conductors, including related connections and terminals.
Voltage Measurement to 500 V
The instrument is also equipped with a 500 V measuring range for
direct and alternating voltages. This provides users with the
advantage of checking devices under test for the absence of
voltage, and discharging capacitive devices under test.
Minimal Battery Depletion
Measurement is only performed in the resistance measuring
ranges when the MΩ or Ω key is pressed. Battery service life is
maximized in this way.
Voltage measurement can be performed without using the
battery.
Characteristic Values
Insulation Resistance Measurement, Measuring Voltages: 100/250/500 V
* Measuring error under reference conditions relative to scale length (l = 84.6 mm)
Low-Resistance Measurement, Measuring Voltage: 4.5 V
* Measuring error under ref. conditions relative to upper range value (l = 74.9 mm)
Voltage Measurement, DC / AC (40 … 200 Hz)
* Measuring error under reference conditions relative to scale length (l = 73.3 mm)
Applicable Regulations and Standards
Measuring
Range
Intrinsic
Uncertainty
Overload Measuring
Current
Short-Circuit
Current
0.1 … 400 MΩ 2.5% 600 V AC > 1 mA < 10 mA
Measuring
Range
Intrinsic
Uncertainty
Overload Measuring
Current
0 … 4 Ω 2.5% 250 V DC >200 mA
Measuring
Range
Intrinsic
Uncertainty
Overload Internal Resistance
0 … 500 V 2.5% 600 V AC 450 kΩ
IEC 61010-1/EN 61010-1/
VDE 0411-1
Safety requirements for electrical equipment for
measurement, control and laboratory use
IEC 61557
EN 61557
VDE 0413
Part 1: General requirements
Part 2: Insulation resistance measuring instruments
Part 4: Instruments for measuring resistance
at ground cables, protective conductors
and equipotential bonding conductors
EN 60529
VDE 0470, Part 1
Test instruments and test procedures
Protection provided by enclosures (IP code)
IEC 61326/EN 61326 Electromagnetic compatibility (EMC)
• Insulation resistance measurement: 0.1 ... 400 MΩ
• Low-resistance measurement: 0 ... 4 Ω
• Voltage measurement: 0 ... 500 V
• LED and beeper
– as function control
– for GO/NO GO decisions
• Scale illuminated by LED
for insulation and low-resistance measurement
• Compact and rugged
For service calls under harsh conditions
and laboratory use