User Manual

14 GMC-I Messtechnik GmbH
makes the multimeter stop updating the maximum or the mini-
mum value.
Note
MIN/MAX function is available in all measuring ranges except in
Hz.
8 Peak Measurement
METRALINE DM 61 and 62 provide a peak hold function to
capture the maximum or minimum peak value. To enter peak
mode, press the PEAK (2) pushbutton for less than 1 second.
A self-calibration process will be executed automatically before
normal peak-hold operation. In peak mode, the main display
shows the current value of signal, and the sub-display shows
the PMAX or PMIN value which is selected by the PEAK key.
After pressing the PEAK (2) pushbutton for the first time, the
sub-display shows the PMAX value. The sub-display shows
the PMIN value when the PEAK (2) pushbutton is pressed
again. To exit the PEAK-hold function, either press the PEAK
key for more than 1 second, operate the function selector
switch (6) or turn the multimeter OFF and ON again.