Datasheet

GMC-I Messtechnik GmbH 19
PROFITEST MTECH+, MPRO, MXTRA, SECULIFE IP
DIN VDE 0100/IEC 60364-6 Testers
Universal protective measures test
instrument per EN 61557, sections
1, 2, 3, 4, 5, 6, 7 and 10 with inte-
grated memory and insulation mea-
surement up to 1000V as well as
additional tripping test for AC/DC
sensitive RCDs and loop impedance
measurement without tripping the
RCD, e-mobility test, Bluetooth inter-
face, DAkkS calibration certifi-
cate and IZYTRONIQ BUSINESS
Starter
PROFITEST MTECH+
IQ M535B
Universal protective measures test
instrument per EN 61557, sections
1, 2, 3, 4, 5, 6, 7 and 10 with inte-
grated memory and insulation mea-
surement up to 1000V as well as
additional tripping test for AC/DC
sensitive RCDs, loop impedance
measurement without tripping the
RCD, selective earth measurement
with current clamps as optional ac-
cessories, testing of IMDs and
RCMs, Bluetooth interface, DAkkS
calibration certificate and IZYTRO-
NIQ BUSINESS Starter PROFITEST MXTRA IQ M535D
Universal protective measures test
instrument per EN 61557, sections
1, 2, 3, 4, 5, 6, 7 and 10 with inte-
grated memory and insulation mea-
surement up to 1000V as well as
additional tripping test for AC/DC
sensitive RCDs and loop impedance
measurement, testing of IMDs, Blue-
tooth interface, DAkkS calibration
certificate and IZYTRONIQ BUSI-
NESS Starter SECULIFE IP IQ M535E
Test Instrument Power Supply Accessories
8 LSD NiMH rechargeable batteries
with reduced self-discharging (AA),
with sealed cells MASTER Battery Set Z502H
Broad-range charger for charging
batteries included in the
PROFITEST
MTECH+
, MPRO, MXTRA and
SECULIFE IP
Input: 100 to 240 V AC
Output: 16.5 V DC, 1 A
PROFITEST MASTER
Charger Z502R
Accessory Plug Inserts and Adapters
Earth contact plug insert (Schuko):
D, A, NL, F etc. PRO-Schuko GTZ3228000R0001
same as PRO-Schuko, however with
angled earth-contact plug PRO-W Z503A
Plug insert per SEV: CH PRO-CH GTZ3225000R0001
Plug insert
with adapters for GB & USA PRO-GB/USA-Set Z503B
Plug insert for South Africa PRO-RSA Z501A
2/3-pole measuring adapter for 3-
phase and rotating-field systems,
300 V/1 A CAT IV with safety cap
600 V/1 A CAT III with safety cap
600 V/16 A CAT II without safety cap PRO-A3-II Z501O
same as PRO-A3-II, however with
straight cables of 10m each instead
of coil cables PRO-A3-II ncc Z503C
Set-Probes CAT III / 600 V, 1 A,
working range of the probes 68 mm
– diameter 2,3 mm Set-Probes Z503F
Designation Type Article Number
Flat test clip for fast and safe con-
tacting on busbars. Powerful con-
tacting on the front and rear of the
busbars by means of established
Multilam. Fixed Ø 4 mm socket in
the pressure grip handle section, to
fit spring-loaded Ø 4 mm plugs with
rigid insulating sleeve.
1000 V CAT IV/32 A PRO-PE Clip Z503G
2 magnetic measurement contacts
with contact protection – Set with
magnetic holder, measurement con-
tacts 5,5 mm in diameter insulated,
CAT III 1.000 V / 4 A, temperature
between –10 °C and 60 °C,
under
standard conditions and flat-head
screws holding force 1.200 g vertical
to contact area;
measuring instrument
connector: 4 mm sockets for PRO-A3-II
Set 3 – Magn. Measuring
Tips
Z502Z
With 10 m cable based on 2-wire mea-
suring technology for PE and similar
measurements, 300 V / 16 A CAT IV
PRO-RLO-II Z501P
With 3 connector cables for any connec-
tion standards, 300 V / 16 A, CAT IV
PRO-UNI-II Z501R
5-pole 3-phase adapter for 16 A
CEE outlets A3-16 GTZ3602000R0001
5-pole 3-phase adapter for 32 A
CEE outlets A3-32 GTZ3603000R0001
5-pole 3-phase adapter for 63 A
CEE outlets A3-63 GTZ3604000R0001
Three-phase adapter shielded,
7-pin for CEE socket outlets 16 A,
CAT III 300 V – 10 A A3-16 Shielded Z513A
Three-phase adapter shielded,
7-pin for CEE socket outlets 32 A,
CAT III 300 V – 10 A A3-32 Shielded Z513B
Variable Plug Adapter Set Z500A Z500A
Calibration adapter for testing of the accu-
racy of measuring instruments for insula-
tion resistance and low-value resistors
ISO Calibrator 1 M662A
Leakage current measuring adapter
for PROFITEST MXTRA and
SECULIFE IP PRO-AB Z502S
Accessories
Extension cable, 4 m KS24 GTZ3201000R0001
Telescoping rod for RLO and RISO
measurement, CAT III 600 V / CAT IV
300 V, 1 A, retracted/extended 53,3
cm/120 cm, 190 g
TELEARM 120
D
Z505C
Telescoping rod for RLO and RISO
measurement, CAT III 600 V / CAT IV
300 V, 1 A, retracted/extended 73,5
cm/180 cm, 250 g
TELEARM 180
D
Z505D
Triangular probe for floor measure-
ments in accordance with EN 1081
and DIN VDE 0100 1081 Probe GTZ3196000R0001
Current clamp sensor for leakage
current, switchable: 1 mA to 15 A,
3% and 1 A to 150 A, 2% WZ12C
D
Z219C
Flexible AC current sensor,
3, 30,
300 A, 1 V, 100 mV, 10 mV / A
, with
batteries, probe length: 45 cm METRAFLEX P300 Z502E
Accessory Cases and Trolleys
Ever-ready case with bags for acces-
sories
Ever-ready Case
PROFITEST MASTER Z502X
Aluminum case for test instrument
and accessories E-CHECK Case Z502M
The E-CHECK case can be mounted
to the trolley.
Trolley for
E-CHECK Case Z502N
Designation Type Article Number