Datasheet

GMC-I Messtechnik GmbH 15
PROFITEST MTECH+, MPRO, MXTRA, SECULIFE IP
DIN VDE 0100/IEC 60364-6 Testers
PRO-RLO-II Plug Insert PRO-UNI-II Plug Insert
3-Phase Current Adapters 5-pole
A3-16, A3-32 and A3-63
3-phase adapters are used
for trouble-free connection
of test instruments to 5-
pole CEE outlets. The
three variants differ with
regard to plug size, which
corresponds respectively
to 5-pole CEE outlets with
current ratings of 16, 32
and 63 A. Phase sequence
is indicated with lamps at
all three variants. Testing
the effectiveness of safety
measures is conducted via five 4 mm contact protected sockets.
3-Phase Current Adapter 7-pole
A3-16 Shielded and A3-32
Shielded 3-phase adapters
are used for trouble-free
connection of test instru-
ments to 7-pole CEE out-
lets. The two variants dif-
fer with regard to plug size,
which corresponds
respectively to 7-pole CEE
outlets with current ratings
of 16 and 32 A. Testing the
effectiveness of safety
measures is conducted via
seven 4 mm sockets with
touch protection.
Variable Plug Adapter Set
Three self-retaining, con-
tact protected test probes
for the connection of mea-
surement cables with
4 mm banana plugs, or
with contact protected
plugs for sockets with an
opening of 3.5 mm to
12 mm, e.g. CEE, Perilex
sockets etc. For example,
the test probes also fit the square PE jacks on Perilex sockets.
Maximum allowable operating voltage: 600 V per IEC 61010.
PRO-AB Leakage Current Measuring Adapter
for PROFITEST MXTRA and SECULIFE IP
Input current:
0 to 10 mA
Input impedance:
1 kΩ ±0.5%
Output voltage:
10:1 0 to 1 V (0.1 V/mA)
1:1 0 to 10 V (1 V/mA)
Output impedance:
10 kΩ
ISO Calibrator 1
Calibration adapter for rapid, effi-
cient testing of the accuracy of
measuring instruments for insula-
tion resistance and low-value
resistors
KS24 Cable Set
The KS24 cable set
includes a 4 m long exten-
sion cable with a perma-
nently attached test probe
at one end and a contact
protected socket at the
other end, as well as an
alligator clip which can be
plugged onto the test
probe.
TELEARM 120 Telescoping Rod
Floor Probe
The 1081 floor probe
makes it possible to mea-
sure the resistance of insu-
lating floors in accordance
with DIN VDE 0100, part
600, and EN 1081.
Socket sight Plug sight
A3-16 Shielded (Z513A)
Socket sight Plug sight
A3-32 Shielded (Z513B)