User Manual

68 GMC-I Messtechnik GmbH
16 Database
16.1 Creating Distributor Structures, General
A complete distributor structure with data for electrical circuits
and RCDs can be created in the PROFITEST MASTER test instru-
ment.
This structure makes it possible to assign measurements to the
electrical circuits of various distributors, buildings and customers.
There are two possible procedures:
• On location or at the
construction site:
Create the distributor
structure in the test
instrument.
A distributor struc-
ture with up to
50,000 structural
elements can be
created in the test
instrument, which is
saved to the instru-
ment’s flash mem-
ory.
or
• Create and save an existing distributor structure with the help
of the report generating program IZYTRONIQ.
Notes concerning IZYTRONIQ
Read the online help for the PC program regarding installation
and use.
16.2 Transferring Distributor Structures
The following data transfer operations are possible:
• Transfer a distributor structure from the PC to the test instru-
ment.
• Transfer a distributor structure including measured values
from the test instrument to the PC.
The test instrument and
the PC must be con-
nected with a USB cable
in order to transfer dis-
tributor structures and
data.
The following image
appears at the display
during transfer of struc-
tures and data.
16.3 Creating a Distributor Structure in the Test Instrument
Overview of the Meanings of Icons used to Create Structures
Icon Meaning
Main
Level
Sub-
Level
Memory menu, page 1 of 3
Cursor UP: scroll up
Cursor DOWN: scroll down
ENTER: acknowledge selection
+ → – change to sub-level
(open directory) or
– → + change to main level
(close directory)
Display of complete structure designation (max.
63 characters) or ID number (max. 25 characters)
in a zoom window
Temporarily switching back and forth between
structure designation and ID number.
These keys do not interfere with the main configu-
ration in the setup menu, see DB MODE on
page 10.
Hide structure designation or ID number
Change display to menu selection
Memory menu, page 2 of 3
Add a structural element
Selection: UP/DOWN scroll keys and ↵
In order to add a designation to the selected
structural element, refer to edit menu in following
column.
Test
in-
stru-
ment
IZY-
TRO-
NIQ
Location Tree
Property
Building