User Manual

14 GMC-I Messtechnik GmbH

5.5 Help Function

The following information can be displayed for each switch posi-

tion and basic function after it has been selected with the rotary selec-

tor switch:

• Wiring diagram

• Measuring range

• Nominal range of use and measuring uncertainty

• Nominal value

➭ Press the HELP key in order to query online help:

➭ If several pages of help are available for the respective mea-

suring function, the HELP key must be pressed repeatedly.

➭ Press the ESC key in order to exit online help.

5.6 Setting Parameters or Limit Values using RCD Measurement as an Example

1 Access the submenu for setting the desired parameter.

2 Select a parameter using the ↑ or ↓ scroll key.

3 Switch to the setting menu for the selected parameter with the → scroll

key.

4 Select a setting value using the ↑ or ↓ scroll key.

5 Acknowledge the setting value with the ↵ key. This value is transferred to

the setting menu.

6 The setting value is not permanently accepted for the respective measure-

ment until

✓ is pressed, after which the display is returned to the main

menu. You can return to the main menu by pressing ESC instead of

✓,

without accepting the newly selected value.

Parameter Lock (plausibility check)

Individually selected parameter settings are checked for plausibil-

ity before transfer to the measurement window.

If you select a parameter setting which doesn’t make sense in

combination with other parameter settings which have already

been entered, it’s not accepted. The previously selected parame-

ter setting remains unchanged.

Remedy: Select another parameter setting.