Manual

Gossen Metrawatt GmbH 35
Note
If you change the parameters in the measurement view,
they’re not saved for the structure element. A measure-
ment with changed parameters can nevertheless be
saved to the structure element, and any changed param-
eters are documented in the report for each measure-
ment.
Retrieving Saved Measured Values
➭ Switch the display to the distributor structure by pressing the
MEM key and select the desired electrical circuit with the scroll
keys.
➭ Switch to page 2
by pressing the key shown here:
➭ Display the measurement data
by pressing the key shown here:
One measurement with date
and time, as well as any com-
ment you might have entered, is
displayed in each screen.
Example:
RCD Measurement
Note
A check mark in the header means that the respective
measurement has been passed.
An X means that the measurement has not been passed.
➭ Scrolling amongst measurements
is possible with the keys shown here:
➭ The measurement can be deleted with the key
shown here:
A prompt window asks you to confirm
deletion.
With the help of the key shown at the right (MW: mea-
sured value / PA: parameter), the setting parameters
can be displayed for this measurement.
➭ Scrolling amongst measurements
is possible with the keys shown here:
Data Evaluation and Report Generation with the Report Generating
Program
All data, including the distributor structure, can be transferred to
the PC and evaluated with the help of the report generating pro-
gram. Additional information can be entered here subsequently
for the individual measurements. After pressing the appropriate
key, a report including all measurements within a given distributor
structure is generated, or the data are exported to an Excel
spreadsheet.
Note
The database is exited when the rotary selector switch is
turned. Previously selected parameters in the database
are not used for the measurement.
9.5 Use of Barcode Scanners and RFID Readers
Search for an Already Scanned Barcode
The search can be started from any switch setting and menu.
➭ Scan the object’s barcode.
The recognized barcode is displayed inversely.
➭ This value is accepted after pressing the ENTER key.
Note
A previously selected object is not taken into consider-
ation by the search.
Continued Searching in General
Regardless of whether or not an object has been found,
searching can be continued by pressing the key shown at
the right:
– Object found: Searching is continued below the previously
selected object.
– Further object found: The entire database is searched at all
levels.
Reading In a Barcode for Editing
If the menu for alphanumeric entry is active, any value scanned by
means of a barcode or RFID reader is accepted directly.
Using a Barcode Printer (accessory)
The following functions are made possible with the help of a bar-
code printer:
• Read-out of ID numbers as barcodes – for quick and conve-
nient acquisition for periodic testing
• Print out repeatedly occurring designations such as test
object types encrypted as barcodes in a list, allowing them to
be read in as required for comments