Datasheet
PROFITESTMASTER SERIES
PROFITESTMTECH+, MPRO, MXTRA, MBASE+
IEC 60364-6, EN 50110-1
20 Gossen Metrawatt GmbH
Scope of Delivery
Standard scope of delivery for PROFITEST MASTER series:
1Test instrument
1 Earthing contact plug insert, country-specific
(PRO-SCHUKO / GTZ3228000R0001)
1 2-pole measuring adapter and cable for expansion into a
3-pole adapter (PRO-A3-II / Z501O)
2 Alligator clips
1 Shoulder strap
1 Compact battery pack (Z502H)
1 Charger (Z502R)
1USB cable
1 DAkkS calibration certificate
1 Condensed operating instructions
1 ETC software **
* Set of complete operating instructions available on the Internet for download from
www.gossenmetrawatt.com
** Download from Internet, registration certificate included
Refer to the order information below for further accessories and
instrument sets with additional accessories for specific testing
purposes.
Order Information
Test instruments from the PROFITEST MASTER series can be
ordered with the standard scope of delivery.
Refer to the scope of delivery on page 3 with regard to the differ-
ences between the instrument variants
Accessories can also be ordered separately. Data sheets are avail-
able separately for some products, in which additional information
can be found. These are indicated with a
D)
in the table.
Each product is identified with its article number, by means of
which it can also be ordered.
Test Instruments – Standard Scope of Delivery
Report Generating Accessories
Power Supply Accessories
Accessory Cases and Trolleys
Accessories – Plug Inserts, Plugs, Measuring Attachments etc.
Designation Description / Scope of Delivery Article Number
PROFITEST MBASE+ PROFITEST MBASE+ test instrument
(M520S) with standard scope of delivery
M520S
PROFITEST MXTRA PROFITEST MXTRA test instrument
(M522P) with standard scope of delivery
M522P
PROFITEST MTECH+ PROFITEST MTECH+(M522R)
with standard scope of delivery
M522R
PROFITEST MPRO PROFITEST MPRO test instrument
(M520N)with standard scope of delivery
M520N
Designation Description Article Number
Profiscanner-RS-232
barcode scanner
D)
Barcode scanner for RS-232 connection
with coil cable (approx. 1 m long)
Z502F
SCANBASE RFID
D)
RFID reader/writer Z751G
Designation Description Article Number
Master Battery Pack 8 LSD NiMH rechargeable batteries with
reduced self-discharging (AA),
with sealed
cells
Z502H
Charger Broad-range charger for charging
the Master Battery Pack
in the test instrument
(Z502H)
Input: 100 … 240 V
AC
Output: 16.5 V
DC
, 1 A
Z502R
Designation Description Article Number
PROFITEST MASTER
ever-ready case
Ever-ready case with external pockets for
accessories
Z502X
E-CHECK case Aluminum case for test instrument and ac-
cessories
Z502M
Trolley for
E-CHECK case
Trolley to which the E-CHECK case can be
mounted
Z502N
F2000
D
Universal carrying pouch Z700D
F2020
D
Large universal carrying pouch Z700F
SORTIMO L-BOXX GM Plastic system case Z503D
Foam SORTIMO
L-BOX X Pro fitest M
Foam insert for SORTIMO L-BOXX GM with
compartment for test instrument
Z503E
Profi-Case
Profi-Case printed with content layout for
sets including test instrument plus acces-
sories, with trolley mount Z502W
Designation Description Article Number
PRO-HB Holder for test probes and measuring adapter Z501V
PRO-Schuko
Plug insert, earthing contact plug: D, A, NL, F
etc.
GTZ3228000R00
01
PRO-W
Plug insert,
angled
earthing contact plug: D, A,
NL, F etc.
Z503A
PRO-W II
Plug insert,
angled earthing contact plug
with PE socket
Z503V
PRO-CH Plug insert per SEV: CH GTZ3225000R00
01
PRO-GB/USA
Plug insert with adapter for GB and USA
Z503B
Probe set Test probe set (red/black)
CAT III 600 V, 1 A
Length: 68 mm, diameter: 2.3 mm
Z503F
Safety Clip Safety clips (red/blue) with hook, CAT IV 1
kV, 20 A
Z503W
PRO-PE Clip
Flat test clip for contacting busbars quickly
and safely. Good contact at the front and
back of the busbar thanks to time-tested
contact blades. Rigid 4 mm socket in the
handle, suitable for the insertion of spring-
loaded 4 mm plugs with rigid insulating
sleeve. CAT IV 1000 V, 32 A
Z503G
Magnetic
Test Probes
2 touch-guarded magnetic test probes,
with magnetic holder, 4
mm sockets
, CAT
III 1000 V, 4 A
Z502Z
PRO-RLO-II
Plug insert for PE and other similar measure-
ments, 2-wire measuring technology, cable
length: 10 m, CAT I300 V, 16 A
Z501P
PRO-RLO 20
Measuring adapter for PE and other similar
measurements, cable length: 20 m, CAT III
600 V
Z505F
PRO-RLO 50
Measuring adapter for PE and other similar
measurements, cable length: 50 m, CAT III
600 V
Z505G
PRO-UNI-II
Plug insert with 3 connector cables for any
connection standards, CAT IV 300 V, 16 A
Z501R
Z500A VARIO-STECKER-Set (3 self-retaining, con-
tact protected test probes for the connec-
tion of measurement cables with 4 mm
banana plugs, or with contact protected
plugs for sockets with an opening of
3.5 mm to 12 mm, e.g. CEE or Perilex
sockets) 600 V per IEC 61010
Z500A