Datasheet
Gossen Metrawatt GmbH 15
PROFITESTMASTER SERIES
PROFITESTMTECH+, MPRO, MXTRA, MBASE+
IEC 60364-6, EN 50110-1
Magnetic Measuring Probes (patented)
with Magnetic Strain Relief (Z502U)
Safety Clip (Z503W)
Plug Inserts for PE and Other Similar Measurements
With 4-wire technology
CAT IV, 300 V
• PRO-RLO-II (Z501P)
Cable length: 10 m
• PRO-RLO 20 (Z505F)
Cable length: 20 m
• PRO-RLO 50 (Z505G)
Cable length: 50 m
PRO-UNI-II Plug Insert (Z501R)
3 connector cables for any con-
nection standards
CAT IV, 300 V
5-Pole 3-Phase Adapter
3-phase adapters
• A3-16
(GTZ3602000R0001),
• A3-32
(GTZ3603000R0001)
and
• A3-63
(GTZ3604000R0001)
permit trouble-free con-
nection of test instruments
to 5-pole CEE outlets The
three variants differ with
regard to plug size, which corresponds respectively to 5-pole
CEE outlets with current ratings of 16, 32 and 63 A. Phase
sequence is indicated with lamps at all three variants. Testing the
effectiveness of safety measures is conducted via five 4 mm
sockets with touch protection.
7-Pole 3-Phase Adapter
Shielded A3-16 and A3-32
three-phase adapters are
used for trouble-free con-
nection of test instruments
to 7-pole CEE outlets.
The two variants differ with
regard to plug size,
which corresponds
respectively to 7-pole CEE
outlets with current ratings
of 16 and 32 A.
Testing the effectiveness of
safety measures is con-
ducted via seven 4 mm
sockets with touch protec-
tion.
VARIO Plug Adapter Set (Z500A)
Three self-retaining test
probes with touch protec-
tion for the connection of
measurement cables with
4 mm banana plugs, or
with touch protected plugs
for sockets with an open-
ing of 3.5 mm to 12 mm,
e.g. CEE or Perilex sockets
etc.
For example, the test probes also fit the square PE jacks on Per-
ilex sockets. Maximum allowable operating voltage: 600 V per
IEC 61010.
Moving touch protection reliably
covers the magnetic contact pin
by means of spring force.
Magnetic
Strain Relief
Socket End Plug End
A3-16 Shielded (Z513A)
Socket End Plug End
A3-32 Shielded (Z513B)