User manual

Prepared in Germany • Subject to change without notice • PDF version available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone: [phone]
Fax: [phone]
e-mail [e-mail]
www.gossenmetrawatt.com
9.3 Fuse Replacement
All fuses for neutral and phase conductors
are accessible from the outside.
The fuses may only be replaced when the
instrument is voltage-free, i.e. the instrument
must be disconnected from mains supply
power and may not be connected to a mea-
suring circuit. The respective fuse type must
comply with the specifications in the techni-
cal data or the labeling on the instrument.
9.4 Return and Environmentally Sound
Disposal
The instrument is a category 9 product
(monitoring and control instrument) in accor-
dance with ElektroG (German electrical and
electronic device law).
This device is subject to the RoHS directive.
We also make reference to the fact that in
this regard, the current status can be
accessed on the Internet at www.gossen-
metrawatt.com by entering the search term
WEEE.
In accordance with WEEE 2012/
19/EU and ElektroG, we identify
our electrical and electronic
devices with the symbol in accor-
dance with DIN EN 50419 which is shown at
the right. Devices identified with this symbol
may not be disposed of with the trash.
Please contact our service department
regarding the return of old devices (see
address below).
10 Repair and Replacement Parts
Service
Calibration Center and Rental
Instrument Service
When you need support, please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 16 - 20
90471 Nürnberg • Germany
Phone [phone]
Fax [phone]
e-mail [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please
contact our representatives or subsidiaries
for service in other countries.
11 Product Support
When you need support, please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone [phone]
Fax [phone]
e-mail [e-mail]
PROFITEST⏐EMOBILITY Addresses