Instructions

8 GMC-I Messtechnik GmbH
2.2 Stipulations for All Measurements
Attention!
!
In order to prevent damage to the in-
strument and the user, the maximum
input quantities may not be exceeded:
Voltage range 300 V AC/DC,
current range 20 A AC/DC.
Note

Exercise caution when opening and closing
the clip jaws around an active conductor.
Save Measured Value Function – DATA HOLD
During the performance of measurements
under conditions which impair easy reading of
display values, the DATA HOLD key can be
activated in order to freeze the momentary
measured value at the display. The DH symbol
appears at the display.
Before starting any new measurements, the
DATA HOLD key must be activated once again in
order to reset the data hold function.
Display of Extreme Value Function – MAX HOLD / MIN HOLD
In order to indicate the highest (MAX HOLD) or
lowest current measured value (MIN HOLD) dur-
ing a measurement, briefly press the corre-
sponding key before starting the measure-
ment; the symbol MAX-H or MIN-H appears.
During this function, the automatic shutdown