Instructions

6 GMC-I Messtechnik GmbH
Attention!
!
Do not perform measurements in the
event of over-ranging!
Current which exceeds the measuring
range may not be measured.
Do not perform measurements at bare
wires!
Do not perform measurements at busbars!
Safe Handling
• The housing and the handles must be free
of dust, grease and moisture.
• The operator’s fingers may not be
extended beyond the safety collar during
measurement.
• Avoid excessive mechanical stress such
as impact and vibration, as well as high
temperatures, moisture and strong
magnetic fields.
• The battery compartment lid must be
secured with the appropriate Phillips head
screw.
1.1 Special Features of the Hall Effect Sensor
Eliminating the influence of magnetization
The clip-on ammeter METRACLIP62 uses the
hall effect for its measurements. The charac-
teristics of the hall effect are subject to a hys-