Instructions
4 GMC-I Messtechnik GmbH
Table of Contents Page
1 Safety Precautions ..............................4
1.1 Special Features of the Hall Effect Sensor ........ 6
2 Operation .............................................7
2.1 Initial Start-Up ............................................... 7
2.2 Stipulations for All Measurements ................... 8
2.3 Measuring Leakage Current at Grounded
Conductors .................................................. 10
2.4 Measuring Leakage Current at
Single-Phase or 3-Phase Systems ................ 11
2.5 Measuring Line Current ................................ 12
3 Characteristic Values ......................... 13
4 Maintenance ......................................16
4.1 Battery Replacement .................................... 16
4.2 Housing ...................................................... 17
1 Safety Precautions
The METRACLIP62 clip-on ammeter has been
manufactured and tested in accordance with
safety regulations IEC 61010-1/EN 61010-1/
VDE 0411-1 and IEC 61010-2-032/
EN 61010-2-032/VDE 0411-2-032.
If used for its intended purpose, the safety of
the user and of the device is assured. The
device may only be operated by properly
trained personnel who are capable of recog-