Instructions

12 GMC-I Messtechnik GmbH
2.5 Measuring Line Current
➭ Turn the measuring instrument on with the
POWER key.
➭ Select the current type via the ACA or DCA
key.
➭ Set the RANGE UP or RANGE DOWN key to the
appropriate range for the current to be
measured.
Otherwise, set the measuring range
switch to the highest of the three ranges in
order to avoid possible over-ranging.
➭ Prior to DC measurements:
Perform zero balancing via the ZERO AD-
JUST key.
➭ Close the clip around a single current con-
ducting cable only.
➭ Read the measured value from the dis-
play.
➭ After measurement has been completed:
Remove the clip from the cable and turn
the measuring instrument off by pressing
the POWER key.