Manual

Gossen Metrawatt GmbH 7
4 Operating Overview
4.1 Connections, Keys, Rotary Switch, Symbols (depending on instrument variant)
METRAHIT IM XTRA BT and METRAHIT IM E-DRIVE BT METRAHIT IM TECH BT
2
3
4
1
5
6
8
section 4.2
section 7.6
section 5.1
section 4.3
13
Max. 1000 V!
12
15
section 6.5 
14
section 3.3 
11
10
7
section 4.4
9
2
3
4
1
5
6
8
section 4.2
section 7.6
section 5.1
section 4.3
13
Max. 1000 V!
12
15
section 6.5 
14
11
7
section 4.4
9
8
section 3.3 
1 Charge level LED (see section 5.1)
2 Display (TFT), see
section 4.2 for meanings of symbols
3 Softkeys (menu-dependent keys for selecting switching functions and parameters, and for starting/ending measurements)
4 STORE: Save key or push/print function for IZYTRONIQ
5 OK: Key for acknowledgment and for restarting the instrument from the standby mode by pressing and holding
6 Rotary switch
for measuring functions (see page 8 for meanings of symbols)
7 DAkkS calibration seal
8 Connector sockets for current measurement with automatic blocking
: ground input
A: current measurement input
9 S+/S–: sense terminals for 4-wire measurements (m /4)
10 Extended connection for Z270S probe
(operating instructions 3-349-996-15) (not METRAHIT IM TECH BT)
11
Connector sockets for voltage measurement with automatic blocking
: ground input
V, , Temp, , ,
COIL measurement input (not METRAHIT IM TECH BT)
12 ESC: Operating mode menu:
Press key briefly: Exit the menu level – jump back to a higher level, exit parameters entry without saving
Press and hold: The instrument is switched to the standby mode. Switch back on by pressing and holding the OK key.
13 MENU: Key for accessing the five main menus.
14 Scroll keys:
 Increase parameter values
Operating mode menu: Selection of individual menu items
 Decrease values
Operating mode menu: Selection of individual menu items
 Increase measuring range or move decimal point to the right ( Man function)
 Decrease measuring range or move decimal point to the left ( Man function)
15 Brightness sensor