Manual

© Gossen Metrawatt GmbHH
Prepared in Germany • Subject to change, errors excepted • PDF version available on the Internet
Alle Handelsmarken, eingetragenen Handelsmarken, Logos, Produktbezeichnungen und Firmennamen sind das Eigentum ihrer jeweiligen Besitzer.
All trademarks, registered trademarks, logos, product names and company names are the property of their respective owners.
Gossen Metrawatt GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gossenmetrawatt.com
15 Addresses
15.1 Product Support
Technical Queries
(use, operation, software registration)
If required please contact:
Gossen Metrawatt GmbH
Product Support Hotline
Phone: [phone]
Fax: [phone]
e-mail:[e-mail]
15.2 Recalibration Service
We calibrate and recalibrate all instruments supplied by Gossen
Metrawatt GmbH, as well as other manufacturers, at our service
center, for example after one year within the framework of your
test equipment monitoring program, as well as prior to use etc.
See also section 11.5.
15.3 Repair and Replacement Parts Service
Calibration Center * and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Beuthener Str. 41
90471 Nürnberg · Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gmci-service.com
This address is only valid in Germany.
Please contact our respective representatives or subsidiaries for
service in other countries.
* DAkkS calibration laboratory for electrical quantities, registration no.
D-K-15080-01-01, accredited per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, AC active power, AC apparent power,
DC power, capacitance, frequency, temperature
Competent Partner
Gossen Metrawatt GmbH is certified in accordance with
DIN EN ISO 9001.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (national accreditation body of the
Federal Republic of Germany) under registration number
D-K-15080-01-01 in accordance with DIN EN ISO/IEC 17025.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates right on up to
DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
As a full service calibration laboratory, we can calibrate instru-
ments from other manufacturers as well.