Manual

20 Gossen Metrawatt GmbH
7.6 Measured Value Memory – STORE Function.
The following options are available for the storage of measured
values:
• Store at the instrument by pressing the STORE key on the
instrument
• Store at the instrument by pressing the STORE key on the
probe (METRAHIT IM XTRA BT and METRAHIT IM E-DRIVE
BT only)
• Store at the PC by triggering the PUSH/PRINT function in the
IZYTRONIQ report generating program
7.6.1 Remote read-out and storage via the Z270S probe
(METRAHIT IM XTRA BT and METRAHIT IM E-DRIVE BT only)
The probe with integrated control unit permits remote triggering at
difficult to access places, and at locations which require your full
attention. The probe can be used for all measuring functions
except for current measurement. The connector cable is shielded
against interference.
➭ Connect the probe’s double plug to the voltage socket (V).
➭ Connect the KS17-2 safety measurement cable to the ground
socket.
➭ Establish contact with the measuring point.
➭ Start the respective measuring function by pressing the START
key on the probe.
➭ As soon as the measured value has settled in, it can be stored
by pressing the STORE key on the probe.
Alternatively, the measured value can be stored with the help
of the STORE key on the instrument.
The REC storage symbol appears briefly in the header in order to
visualize the storage process.
Electrical Safety
Measurements per DIN EN 61010-031 may only be performed in
environments in accordance with measuring categories III and IV
with the safety cap attached to the control unit’s test tip.
In order to establish contact inside 4 mm sockets, the safety cap has
to be removed by prying open the snap fastener with a pointed
object (e.g. the other test probe).
7.6.2 Remote Read-Out and Storage via the PC – PUSH/PRINT
Function
The procedure for storage via the PUSH/PRINT function is
described in the online help included with IZYTRONIQ report gen-
erating software.
Maximum rated voltage 300 V 600 V 600 V
Measuring category
CAT IV CAT III CAT II
Maximum rated current 1 A 1 A 16 A
With safety cap attached —
Without safety cap — — 
START
STORE
Test Tip
Safety Cap
Safety Collar
Z
2
7
0
S
REC
S– A
V
Tem p
m/4
COIL
S+
KS17-2