User manual

4 GMC-I Messtechnik GmbH
Standard Equipment Contact Persons
Recalibration Service
Our service center calibrates and recalibrates (e.g. after one year as
part of your test equipment monitoring system, prior to use etc.)
all instruments from GMC-I Messtechnik GmbH and other
manufacturers, and offers free test equipment management.
Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg · Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* DAkkS Calibration laboratory for measured electrical quantities,
D-K-15080-01-01, accredited in accordance with
DIN EN ISO/IEC 17025
Accredited measured quantities: direct voltage, direct current values,
DC resistance, alternating voltage, alternating current values, AC active
power, AC apparent power, DC power, capacitance, frequency and
temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (National accreditation body for the
Federal Republic of Germany) in accordance with DIN EN ISO/IEC
17025 under registration number D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology:
from test reports and proprietary calibration certificates right on up to
DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
As a full service calibration laboratory, we can calibrate
instruments from other manufacturers as well.