Datasheet

GMC-I Messtechnik GmbH 7
METRACAL⏐MC
Multimeter, Calibrator
Accessory Calibration Software METRAwin
®
90-2
The calibration software METRAwin
®
90-2 is a multilingual Win-
dows-based software program for the PC-aided control of vari-
ous calibrators from our product range (METRACAL MC, METRAHIT
CAL, METRAHIT 28C, METRAHIT 28C light and METRAHit 18C)
as well as for the documentation of calibration results.
• Convenient and interactive control of the calibrator which is
connected with the PC by direct data entry as individual value
• Straightforward and fast generation, testing and execution of
calibration procedures
• Simple operation: even semi-skilled personnel is enabled to
perform qualified calibration tasks
• Displaying of automatically created or user-defined operating
instructions before performing a sequence step
• With connected multimeter: displaying and continuous updat-
ing of the measured value which is transmitted via interface
• High application flexibility due to tracking of the calibration sig-
nal (for analog measured value indicators, recorders, etc.),
entry of a read-out measured value via keyboard or querying
measured values via interface from a multimeter
• ISO-9000 compliant documentation of the calibration in the
form of a standardized or user-definable protocol, including
the required details on calibration object and system and
schedule of the calibration values and their evaluation for each
calibration point
• Dynamic data transfer to the report templates edited by the
user in Microsoft
®
Excel™ or Microsoft
®
Word™ (e. g. with
their own company logo)
• Safe storage of procedures and protocols on data carrier.
Direct entry of calibration values
The software performs the interactive (in operating mode DIRECT)
or sequence-controlled (in operating mode TEST) adjustment of
the calibrator by means of a PC via the IR interface (by using the
interface adapter USB-XTRA), the automatic evaluation of the
measured values which are either manually entered or transmitted
from a multimeter via the interface as well as the documentation
and storage of the calibration results in a calibration report.
Calibration procedures for the respective calibration objects can
be easily created and tested with the software.
Calibration procedure for measuring transducers (Function
„TEST“)
Print-out of a calibration report in accordance with ISO 9001, indi-
cating traceability (4.11b), calibration method (4.11c), measuring
uncertainty (4.11d), Pass/Fail (4.11g) as well as ambient condi-
tions (4.11h).