Datasheet

GMC-I Messtechnik GmbH 5
METRACAL⏐MC
Multimeter, Calibrator
LCD Test All display segments available during
operation of the METRACAL MC are acti-
vated after the instrument is switched on.
Power Supply
Battery 2 ea. 1.5 V mignon cell (AA),
alkaline manganese per IEC LR6
or equivalent rechargeable battery
Service life With alkaline manganese (2600 mAh)
If voltage drops below 1.8 V, the
instrument is switched off automatically.
Battery test Battery capacity display with battery
symbol in 4 segments: “ ”. Querying of
momentary battery voltage via menu
function.
Mains Power With NA X-TRA power pack
Power Saving Circuit
The device is switched off automatically if the measured value
remains unchanged for a long period of time, and if none of the
controls are activated before a selected period of time in minutes
elapses. In the case of the simulator, the output is switched off
first, followed by the display one minute later, if no controls have
been activated.
Automatic shutdown can be deactivated (APoFF = ON).
Fuses
Fuse links DMM (mA current measuring ranges):
F2: FF0.63A/400V, 5 mm x 20 mm
Breaking capacity ≥ 10 kA at 400 V AC
(article number: Z109M)
Calibrator:
F1: FF0.16A/400V, 5 mm x 20 mm
Breaking capacity ≥ 10 kA at 400 V AC
(article number: Z109N as from 06.2016)
Multimeter Electrical Safety
Protection Class II per DIN EN 61010-1:2011/VDE 0411-1:2011
Measuring category II
Operating voltage 300 V
Pollution degree 2
Test Voltage 2.2 kV~ per DIN EN 61010-1:2011/
VDE 0411-1:2011
Electromagnetic Compatibility (EMC)
Interference emission EN 61326-1:2013 class B
Interference immunity EN 61326-1:2013
EN 61326-2-1:2013
Ambient Conditions
Accuracy range 0 °C … +40 °C
Operating temp. range −10 °C … +50 °C
Storage temp. range −25 °C … +70 °C (without batteries)
Relative humidity 40% … 75%, no condensation allowed
Elevation To 2000 meters
Mechanical Design
Protection IP 65,
Table Excerpt Regarding Significance of
IP Codes
Dimensions 200 x 87 x 45 mm
Weight Approx. 430 g with batteries
Data Interface
Typ e Optical via infrared light through the housing
Data transmission Serial, bidirectional (not IrDa compatible)
Protocol Device specific
Baud rate 38,400 baud
Functions DMM: read data and parameter DMM
Calibrator: set/query calibration functions
and parameters
The USB X-
TRA plug-in interface adapter (see accessories) is used
for adaptation to the PC’s USB port.
Scope of Delivery
1 METRACAL MC calibrator with 2 batteries per IEC LR6
1 KS29 safety measurement cable set consisting of 3 measur-
ing cables (1 black, 1 blue, 1 red) with 90° offset safety plugs,
test probes and 3 safety caps for CAT IV, 1000 V CAT II 16 A /
600 V CAT IV 1 A
1 GH-XTRA rubber holster
1 DAkkS calibration certificate
1 Abbreviated instructions*
* Detailed operating instructions are available for download on the Internet
at www.gossenmetrawatt.com
Measuring Function Current Service Life
V, Hz, mA, Ω
2
, F, °C 31mA 70 h
Standby (MEM + clock) 350 μA Approx. 1 year
Calibration Function Service Life
mV, thermocouple 80 mA 25 h
15 V 200 mA 10 h
Ω, RTD 130 mA 15 h
Sink, 20 mA (25 V) 300 mA 5 h
Source, 20 mA max. load < 5V 230 mA 10 h
IP XY
(1
st
digit X)
Protection against foreign
object entry
IP XY
(2
nd
digit Y)
Protection against the
penetration of water
6 Dust-proof 5 Jet-water