Datasheet

ManualsBrandsGOSSEN METRAWATT ManualsTest EquipmentMETRAHIT MULTICAL Calibrator Voltage, Amperage, Temperature 2 x AA battery (included) Calibrated to DAk

METRACAL⏐MC

Multimeter, Calibrator

3-349-564-03

12/1.18

GMC-I Messtechnik GmbH

DAkkS Calibration Certificate as Standard Feature

German

Accreditation Body

D-K-15080-01-01

Applications

Process engineers can use the METRACAL MC as a calibrator and a

multimeter simultaneously, e.g. in order to simulate sensor condi-

tions at the input of a transmitter while measuring and saving the

output signal.

If the USB X-

TRA plug-in infrared interface adapter (accessory) is

attached to the instrument, measurement and calibration results

can be uploaded to a PC, where they can be recorded and

printed out as a calibration report. The multimeter can also be

used as a data logger. METRAwin

10/METRAHit

PC software

(accessory) allows for convenient evaluation and display of

measurement data, and METRAwin

90-2 (accessory) can be

used to create ramp and interval sequences, to control the

METRACAL MC online, as well as for the generation of calibration

certificates.

Calibrator with Loop Current Measuring Instrument

Universal Calibration Standard

Integrated electronics generate mV, V and mA signals. Beyond

this, they’re capable of simulating thermovoltages for various

types of thermocouples for predefined temperatures (°C or °F), as

well as for various Pt and Ni temperature sensors.

Frequency Generator

Continuous frequency signals can be transmitted by the

METRACAL MC for testing SPCs, energy metering devices, flow

rates and more. Amplitude and frequency are adjustable for the

generated square-wave pulses, which are used to simulate sen-

sor pulses.

Calibration and Simulation

Measuring transducers with a wide variety of input signals

(voltage, thermovoltage, RTD and 2-wire resistance sensors etc.)

can be directly connected and calibrated. If a multimeter is used

(e.g. METRAHIT XTRA), respective values can be measured at the

measuring transducer’s output, transmitted to a PC via an

adapter if desired, displayed with the help of METRAwin

90-2

software and compared with the appropriate calibration

specifications. Setpoint values and actual values are displayed, or

printed as a certificate. When operated in the “mA sink” mode,

the METRACAL MC simulates a 2-wire transmitter and retrieves the

selected current value from the measuring sequence.

Measurement Data Memory (16 MBit / 46,000 Measured Values)

The calibrator is connected to a PC with the attached USB X-

TRA

interface adapter (accessory). The software METRAwin

10/

METRAHit

, which is available as an accessory, and the interface

adapter USB X-TRA are used to transmit recorded measured val-

ues to a PC by means of the multimeter function for convenient

subsequent visualization, evaluation and report generation.

• Universal calibrator, simulator and multimeter

mA / mV … V / °C (Pt100/1000, Ni100/1000,

thermocouples: J, L, T, U, K, E, S, R, B, N) / 30 … 2000 Ω

• Dual mode – simultaneous calibration and measurement (U/I)

• Measuring and encoding in absolute terms and as percentage (scaled)

• Memory for measurement results: 16 MBit

• Frequency generator: 1 Hz to 2 kHz

• Ramp and staircase functions

• Transmitter simulator (sink: 0 … 24 mA)

• DAkkS calibration certificate included

• Rugged, EMC compliant design

• Precision multimeter (V, A, Ω, F, Hz, °C/°F)

30,000 (60,000) digits and triple display

• TRMS AC measurement to 20 kHz

• Bidirectional IR data interface

• Free device driver for LabView® (National Instruments)

• Optional calibration software METRAwin

90-2

• Optional measurement data acquisition and analysis software

METRAwin

10/METRAHit

Summary of content (8 pages)

PAGE 1
METRACAL⏐MC Multimeter, Calibrator • Universal calibrator, simulator and multimeter mA / mV … V / °C (Pt100/1000, Ni100/1000, thermocouples: J, L, T, U, K, E, S, R, B, N) / 30 … 2000 Ω • Dual mode – simultaneous calibration and measurement (U/I) • Measuring and encoding in absolute terms and as percentage (scaled) • Memory for measurement results: 16 MBit • Frequency generator: 1 Hz to 2 kHz • Ramp and staircase functions • Transmitter simulator (sink: 0 … 24 mA) • DAkkS calibration certifica
PAGE 2
METRACAL⏐MC Multimeter, Calibrator Characteristic Values Calibration signals can be read out either manually (numerically with key entries), or automatically by means of intervals with intermediate steps, or as a ramp in a stepless fashion. The METRACAL MC can thus be used as a precision pulse generator for dynamic testing.
PAGE 3
METRACAL⏐MC Multimeter, Calibrator Multimeter Section Meas. Func- Measuring Range tion V Resolution at Upper Range Limit 60 mV 2) 300 mV 3 V 30 V 300 V 30,000 1) 3000 1) (60,000) 1 μV 10 μV 100 μV 1 mV 10 mV 0.3 3 30 300 mA mA mA mA 10 100 1 10 300 3 30 300 3 30 300 Ω kΩ kΩ kΩ MΩ MΩ Ω 10 mΩ 0.1 Ω 1 Ω 10 Ω 100 Ω 1 Ω 6 V 1 mV DC mA ς Ω 30 300 3 30 300 F nF nF μF μF μF ±(...% rdg. + ... d) DC AC 4) 10) Value Time 0.1 + 10 0.08 + 10 0.05 + 10 0.05 + 10 0.05 + 10 — 0.
PAGE 4
METRACAL⏐MC Multimeter, Calibrator Influencing Quantities and Influence Error Influencing Quantity Influencing Quantity Sphere of Influence Measured Quantity / Measuring Range 1) Influence Error ± (... % rdg. + d)/10 K V DC, °C (TC) 0.1 + 10 V AC 0.5 + 10 3/30 mA DC 0.1 + 10 3/30 mA AC 0.5 + 10 300 mA DC, AC 0.5 + 10 300Ω/3/30/300 kΩ 2L 0.2 + 10 3 MΩ 2L 0.5 + 10 0 … +21 °C Temperature and 30 MΩ 2L 1 + 10 30/300 nF/3/30/300 μF 0.5 + 10 +25...+40° C Hz 0.1 + 10 °C (RTD) 0.
PAGE 5
METRACAL⏐MC Multimeter, Calibrator LCD Test All display segments available during operation of the METRACAL MC are activated after the instrument is switched on. Electromagnetic Compatibility (EMC) Interference emission EN 61326-1:2013 class B Interference immunity EN 61326-1:2013 EN 61326-2-1:2013 Power Supply Battery Service life 2 ea. 1.
PAGE 6
METRACAL⏐MC Multimeter, Calibrator Accessories HitBag Cordura Belt Pouch (Z115A) for METRAHIT multimeters (with/without rubber holster) HC20 hard case (Z113A) for METRAHIT multimeters (with/without rubber holster) and accessories HitBag L Cordura Belt Pouch (Z115B) (without contents) For METRAHIT multimeters (with and without rubber holster) and accessories F829 carrying pouch For METRAHIT multimeters (with and without rubber holster) and accessories Interface Adapter for USB Connection (Z216C) The USB
PAGE 7
METRACAL⏐MC Multimeter, Calibrator Accessory Calibration Software METRAwin®90-2 The calibration software METRAwin®90-2 is a multilingual Windows-based software program for the PC-aided control of various calibrators from our product range (METRACAL MC, METRAHIT CAL, METRAHIT 28C, METRAHIT 28C light and METRAHit 18C) as well as for the documentation of calibration results.
PAGE 8
METRACAL⏐MC Multimeter, Calibrator Order Information Description Description Type Article Number Calibrator, see standard equipment for METRACAL MC METRACAL MC M245A Hardware Accessories Power pack with broad range input: AC 90 ... 253 V / DC 5 V, 600 V CAT IV NA X-TRA Microprocessor-controlled fast charger for 1 to 4 NiMH or NiCd rechargeable batteries, model AA or AAA, including a 100 to 240 V AC mains adapter and a 10 ...