User manual

22 GMC-I Messtechnik GmbH
9.1 Querying Parameters – InFo Menu
bAtt – query battery voltage
inFo
bAtt 3.1 V.
tiME / dAtE – query date and time
inFo
bAtt  ...  02 . 01 . 2008 13:46:56
DD.MM.YYYY hh:mm:ss
D = day, M = month, Y = year, h = hour, m = minute, s = second
Date and time must be reentered after replacing the batteries.
cALdAt – query calibration date
inFo
bAtt  ...  caldat 02 . 01 . 08 uEr 0. . 04
ItEMP – query internal reference temperature and temperature unit of
measure
The temperature of the internal reference junction is measured
with a temperature sensor in close proximity to the input sockets.
inFo
bAtt  ...  1tEMP internal 24 . 2 ° C
9.2 Entering Parameters – SETUP Menu
tiME – set time
Entering the correct time makes it possible to calibrate in
real-time.
inFo  SET time
time set 10:24:24 (hh:mm:ss)  
Date and time must be reentered after replacing the batteries.
dAtE – enter date
Entering the current date makes it possible to calibrate in
real-time.
inFo
 SET time  dAtE
date set 02.01 (DD: day . MM: month)  wrs
year set 2008 (YYYY: year)  
Date and time must be reentered after replacing the batteries.
MEAS/CAL
SETUP
OUT
ENTER
MEAS/CAL
SETUP
OUT
ENTER
MEAS/CAL
SETUP
OUT
ENTER
MEAS/CAL
SETUP
OUT
ENTER
MEAS/CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
MEAS/CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
OUT
ENTER