User manual

GMC-I Messtechnik GmbH 27
12 Repair and Replacement Parts Service
Calibration Center * and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg, Germany
Phone [phone]
Fax [phone]
E-mail [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our representatives or subsidiaries for
service in other countries.
* DAkkS Calibration Laboratory for Measured Electrical Quantities
D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current values, DC resistance, alternating voltage, alternating
current values, AC active power, AC apparent power, DC power, capacitance, frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutscher Kalibrierdienst (German Cal-
ibration Service) in accordance with DIN EN ISO/IEC 17025:2005 under registration number
D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology: from test reports and factory
calibration certificates, right on up to DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment management.
An on-site DAkkS calibration station is an integral part of our service department. If errors are
discovered during calibration, our specialized personnel are capable of completing repairs
using original replacement parts.
As a full service calibration laboratory, we can calibrate instruments from other
manufacturers as well.