Datasheet

Edited in Germany • Subject to change without notice • A pdf version is available on the internet
METRATESTER 5+
Tester for DIN VDE 0701-0702
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gossenmetrawatt.com
Accessories
Brush Probe
The brush probe is suit-
able for contacting
exposed conductive
parts which rotate or
vibrate during operation,
e.g. drill chucks, vibrat-
ing sanders and tool
mounts. The brush must
be plugged onto the test
probe.
KS13 Cable Set
The KS 13 cable set
consists of an adapter
socket with 3 perma-
nently connected cables,
3 measurement cables, 3
plug-on pick-off clips and
2 plug-on test probes.
With the KS 13, the test
instrument and the
device under test can be
connected even if no earthing contact socket is available for the
mains connection, or no earthing contact plug is present at the
device under test.
Order Information
For additional information on accessories, please refer to
• our „Measuring Instruments and Testers“ catalogue
• our website www.gossenmetrawatt.com
Designation Type Article Number
Device for testing the electrical
safety of electric equipment per
DIN VDE 0701-0702
METRATESTER 5+ M700D
Same as METRATESTER 5+
as panel mount version METRATESTER

5-F-E M700T
Accessory
Probe for the measurement of
protective conductor resistance, e.g.
on rotating DUTs Brush probe Z745G
Cable set for mains connection
without earthing contact outlet and
for connecting DUTs, consisting of
adapter socket with 3 permanently
connected cables, 3 measurement
cables, 3 plug-on pick-off clips,
2 plug-on test probes KS13 GTY3624065P01