User manual

42 GMC-I Messtechnik GmbH
4.8.2 Modifying, Adding, Inserting, Deleting Sequences
Exampel 1: Based on the example 1 in section 4.8.1, step 1 modifies the time to 2 s. Add “CCH, 5 A, 1S” to the last step. Insert “CRL ,
1 Ω,10 S” at step 3. Delete step 2. The sequence is chained to itself to realize the continuous execution.
Steps Description Display
Step 1 Press the key + key to enter into sequence operation menu.
►No.: 0
Memo: Test Power
Step 2 Use the ▼ key to select Data:<New/Edit>.
►Data:<New/Edit>
Count: 5
Step 3 Use the ► key or knob to select Edit, and press the Enter key to confirm and enter step edit screen.
01. 1.00000s
CCL 1.0000A
Step 4 Use the ► key to select time parameter, and the time set value flashes.
01. 1.00000
s
CCL 1.0000A
Step 5 Use the Entry keys or the knob together with ◄ ► keys to input the time to 2 s, and press the Enter key to confirm.
01. 2.00000s
CCL 1.0000A
Step 6 Use the ▼ key to select the last new step (Step6).
06. 0.00000
s
CRH 20.000Ω
Step 7
Add a new step: CCH, 5 A, 1 S. The set value in the upper right corner of the display flashes. Use Entry keys or the knob together
with ◄ ► keys to input time to 1 s, and press the Enter key to confirm.
06. 1.00000
s
CRH 20.000Ω
Step 8
The basic mode showed in lower left corner of the display flashes. Use the knob or the key to select operating mode to
CCH, and press the Enter key to confirm.
06. 1.00000s
CCH 0.000A
Step 9
The set value in the lower right corner of the display flashes. Use Entry keys or the knob together with the ◄ ► keys to input the
current value to 5 A. Press the Enter key to confirm and enter into the next operation.
06. 1.00000s
CCH 5.000
A
07. 0.00000s
CCH 0.000A
Step 10 Use the ▲ key to select the step 3.
03. 1.00000s
CV 1.000V
Step 11 Press the key + key to insert a new step at step 3.
03. 0.00000
s
CV 0.000V
Step 12 Insert a new step: CRL, 1
Ω, 10 S at step 3. The setting operations for this new step are the same as described under items 7 to 9.
03. 10.00000s
CRL 1.0000Ω
Step 13 Use the ▲ key to select the step 2.
02. 1.00000s
CCH 2.000A
Step 14 Press the key + key to delete the step 2.
02. 10.0000s
CRL 1.0000Ω
Step 15 Press the key to exit step edit screen and save the sequence data in EEPROM assigned by the sequence number.
►Data:<New/Edit>
Count: 5
Step 16 Use the ▼ key to select Chain.
►Chain: Off
Step 17
Use Entry keys or the knob to input 0 (it is chained to itself to realize continuous execution).
Press the Enter key to confirm and save the Chain value in EEPROM assigned by the sequence number.
►Chain: 0
Step 18 Press the key to exit sequence operation menu.
0.000V 0.000A
0.000A CCH OFF