User manual

GMC-I Messtechnik GmbH 55
1)
Maximum continuous power available is derated linearly from 100% of maximum at 40 °C to 75 % of maximum at 55 °C.
2)
Conductance (S) = 1 / resistance (Ω).
3)
The setpoint is 10 times larger than the rise rate in CCL mode (constant current low level range).
4)
The momentary transition time is defined as the time required for the input to change from 10% to 90% or from 90% to 10% of the programmed excursion.
5)
Transient frequency depends on the time for high/low level and rising/falling edge.
6)
Full remote control via RS232 with optional GPIB and USB.
Dimensions
Reverse Current Capacity
Input OFF 25 A 30 A 25 A 25 A
Input ON 40 A 50 A 35 A 40 A
Ripple and Noise
Current (rms/p-p) 3 mA / 30 mA 3 mA / 30 mA 3 mA / 30 mA 3 mA / 30 mA
Voltage (rms) 5 mV 5 mV 12 mV 12 mV
Environmental Conditions
Temperature 0 ... 50 °C 0 ... 50 °C 0 ... 50 °C 0 ... 50 °C
Relative Humidity ≤ 85% ≤ 85% ≤ 85% ≤ 85%
Remote Interface
6
RS232, GPIB RS232, GPIB RS232, GPIB RS232, GPIB
Programming Language SCPI SCPI SCPI SCPI
Mains Input
Supply Voltage AC 115 V / AC 230 V +10/−15% AC 115 V / AC 230 V +10/−15% AC 115 V / AC 230 V +10/−15% AC 115 V / AC 230 V +10/−15%
Line Frequency 48 ... 63 Hz 48 ... 63 Hz 48 ... 63 Hz 48 ... 63 Hz
Dimensions 213 mm x 104 mm x 391 mm 213 mm x 104 mm x 391 mm 213 mm x 104 mm x 391 mm 213 mm x 104 mm x 391 mm
Dimensions with rubber protection 226 mm x 110 mm x 414 mm 226 mm x 110 mm x 414 mm 226 mm x 110 mm x 414 mm 226 mm x 110 mm x 414 mm
Net Weight 5.8 kg 5.8 kg 5.8 kg 5.8 kg
Gross Weight (rubber protection in-
cluded)
Approx. 6 kg Approx. 6 kg Approx. 6 kg Approx. 6 kg
Type SPL 250-30 SPL 400-40 SPL 200-20 SPL 350-30
Article number K852A K853A K854A K855A