User manual

SSL ELECTRONIC LOAD SERIES 32 EL
GMC-I Messtechnik GmbH
33
2.13 Use ElectronicLoad software control your load
Start the ElectronicLoad program, from the Eload List, select the load you want to use. If the desired load does not
appear on the Eload List, use Eload Setting to add the desired load.
Click the Setting button, ensure that the Com port, baud rate and address is the same as that of the load..
Click the Start button to start communication. Using the Control Mode switch, set the load in PC control
mode; You may now control the load from the computer.
Prior to quitting the ElectronicLoad program, do remember to return the setting of your load to the Self control
mode, failing which, you will be unable to control your load using it's own keyboard.
In the event of communications failure, please check the Com port, baud rate and Address settings. Also ensure that
the communication cable is firmly and correctly connected.