User manual

SSL ELECTRONIC LOAD SERIES 32 EL
30
GMC-I Messtechnik GmbH
2.10 Programming Window:
ElectronicLoad allows user to make an own program to control the SSL KONSTANTER 32 EL load. User can
select the load mode, and define load value (current, power, resistance) and duration of each program step.
Click the button, the Program window will be displayed:
Fig.2-15 Programming window
Select an “Electronic Load Mode”; enter the load value and the duration of each program step.
The maximum program length is 10 steps. But user may decided only run part of them. Use the “Run Steps” push bar
to decide how many steps you want to run.
Program State is used to define whether repeat to run this program.
When finishing, press “OK” to store the program and go back to the main window.
Press button to run the program; press button to stop the program.
2.11 Eload setting
Click the button, the Eload setting window will be displayed.
Fig.2-16 The Eload Setting window