User manual

SSL ELECTRONIC LOAD SERIES 32 EL
GMC-I Messtechnik GmbH
13
2.2.5 Recall a program
To recall a program stored in the SSL KONSTANTER 32 EL, please follow this operation procedure:
Procedure
Operation details
LCD display
Step1
Press “ Recall ” button
RECALL 1
Step 2
Enter the program number (1 to 9) by using the number
key or the rotary knob
RECALL *
Step 3
Press the “ OK ” button for confirmation. It will return to
Step 2 if the number is out of the range.
You can exit the recall operation at any point by pressing the ESC key
2.2.6 Start a program
Press “Start” button to run the current program.
2.2.7 Stop a program
Press “Stop” button to stop the running program.
2.2.8 Load On/Off
The load’s input can be toggled on/off through the Load On/Off key.
2.3 Menu operation
The Menu operation offers some setting and adjusting functions. The operation and functions are as following.
Procedure
Operation details
LCD display
Step1
Press “ Menu ” button
Step 2
The LCD displays the menu functions. Use
the UP and DOWN keys to select a
function, then press “ OK ” for
confirmation
Maximum Current
Maximum Power
Min Input Volt
Baud Rate
Address
Knob Enable
Program
Save Option
Key Lock
Load Default
Exit
You can exit the menu operation at any point by pressing the ESC key