User manual

Edited in Germany • Subject to change without notice • A pdf version is available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gossenmetrawatt.com
9 Order Information
Software
Mounting
10 Repair and Replacement Parts Service,
Calibration Center* and
Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nuremberg, Germany
Phone [phone]
Fax [phone]
E-mail [e-mail]
This address is only valid in Germany.
Please contact our representatives or subsidiaries for service in
other countries.
* Calibration Laboratory for Electrical Quantities
DKD – K – 19701 accredited per DIN EN ISO/IEC 17025:2005
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, alternating current active power,
alternating current apparent power, DC power, capacitance, frequency,
temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with DIN EN ISO 9001:2000.
Our DKD calibration lab is accredited by the Deutscher Kalibrierdienst
(German Calibration Service) in accordance with DIN EN ISO/
IEC 17025:2005 under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology: from test
reports and factory calibration certificates, right on up to DKD calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
Our service department includes an on-site DKD calibration bench. If errors
are discovered during calibration, our specialized personnel are capable
of completing repairs using original replacement parts.
As a full service calibration lab, we can calibrate instruments from other
manufacturers as well.
11 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone [phone]
Fax [phone]
E-mail [e-mail]
Type Description Article Number
62 N 52 RU 25 P SSP-KONSTANTER 500-52 K344A
62 N 52 RU 50 P SSP-KONSTANTER 1000-52 K345A
64 N 52 RU 100 P SSP-KONSTANTER 2000-52 K352A
64 N 52 RU 150 P SSP-KONSTANTER 3000-52 K362A
62 N 80 RU 12,5 P SSP-KONSTANTER 500-80 K341A
62 N 80 RU 25 P SSP-KONSTANTER 1000-80 K343A
64 N 80 RU 50 P SSP-KONSTANTER 2000-80 K351A
64 N 80 RU 75 P SSP-KONSTANTER 3000-80 K361A
IEEE 488/
RS 232 interface
Option for SSP 62N/64N-BZ3 K382A
RS 232 interface Option for SSP-62/64N-BZ3 K383A
Type Designation Article No.
K930D LabView, device driver for SSP KONSTANTER
series 120, 240, 320 and
series 500, 1000, 2000, 3000
K930D
K930E LabWindows / CVI, device driver for SSP KONSTANTER
series 120, 240, 320 and
series 500, 1000, 2000, 3000
K930E
K930F HPVEE / VXI PnP, device driver for SSP KONSTANTER
series 120, 240, 320 and
series 500, 1000, 2000, 3000
K930F
Description Note Article No.
RS 232 bus cable, 2 m For connecting a device to an RS 232
interface (extension cable,
9-pin socket / 9-pin plug connector)
GTZ3241
000R0001
IEEE - IEEE bus cable, 2 m For connecting a device to the IEEE 488 bus
system
K931A