User manual

GMC-I Messtechnik GmbH 89
8.5 Memory Structure
#1
Actual Value Query
Setpoint Specification
REPETITION STOP START TDEF MINMAX DELAY OCP OVSET (OVP) ILIM ULIM OUTPUT TSET ISET USET
SETUP Memory
Min-Max Measured
Momen-
Power Off Memory
Default Device Setting
#10
#11 #255
UMAX
UMIN
IMAX
IMIN
UOUT
IOUT
POUT


UOUT > UMAX
UOUT < UMIN
IOUT > IMAX
IOUT < IMIN
*SAV n
*RCL n
*RCL n or SEq Go
SEQUENCE Memory
STORE? n
e.g. USET v
e.g. USET?
STORE n
Mains Power On & Pon rcl / SbY
*RST
Power On & Pon rSt
Mains Power Off
*SAV n
Active Device setting
n = 1 ... 10 n = 11 ... 255
e.g. UMAX?
e.g. UOUT?
T_MODE

Non-volatile memory range
Memory locations can be overwritten with the “Store” command, or completely deleted from the start address to the stop address with the “*SAV 0” command. The “insert” and “delete” commands can be used within this range. The contents of individual memory locations can be deleted with the “Clear” command, regardless of how the range of memory locations has been defined.
Measured tary Values
Value Memory