User manual

28 GMC-I Messtechnik GmbH
UI_ – Display Measured Values in U/I Min-Max Memory
Functions
• Reads out stored values for Umin, Umax, Imin and Imax at the
display, or via the computer interface.
• Stored Min-Max values can be read out regardless of the
status selected for the MINMAX function.
Settings
☞ Select from the Set menu with the <FUNCTION> key.
☞ After U
_, U , I_ or I is displayed for the first time, browsing
amongst these values is possible with the <> and <> keys.
! U_, U , I_ or I appears in the setup function display, and the
corresponding measured value appears at the left-hand
display.
☞ Default setting after RESET (*RST): Measured value memory is
cleared!
rnd – Rounding Off the Displayed Measured Value
Applications
The ROUND function can be used where fluctuating measured
values are to be expected due to the application (e.g. in
manufacturing), which may cause unnecessary concern.
Functions
The ROUND function defines how many decimal places will be
displayed for measured Uout and Iout values.
Setting Parameters
☞ 0: no rounding
☞ –1: rounded off by one decimal place
☞ –2: rounded off by two decimal places
Settings
☞ The procedure for configuring Rnd is described in principle in
chapter 4.7 and in Figure 4.7.1 a.
! However, the rnd display and a
related text parameter appear in the
setup function window.
Figure 4.7.1 e Path to Selection of the rnd Text Parameter
☞ Default setting after RESET (*RST): unchanged
CE/LOCAL
Uout
Iout
FUNCTION SAVE RCL
Abort
Abort
Abort
Abort
FUNCTION
+
FUNCTION
ENTER
FUNCTION
FUNCTION
FUNCTION
FUNCTION
Uset/Iset FUNCTION
MENU
SAVE
MENU
RCL
MENU
FUNCTION
MENU
Select the text parameter
from an options loop
From the SEt function group
*
ENTER
CE/LOCAL
FUNCTION SAVE
RCL
Uset/Iset FUNCTION
MENU
SAVE
MENU
RCL
MENU
FUNCTION
MENU
Activate
the setting
Abort
without change