User manual

LABKON Series
_________________________________________________________________________________________________
56 GMC-I Messtechnik GmbH
Readback Resolution
Voltage
1 mV
1 mV
2 mV
1 mV
1 mV
2 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
1 mA
Meter Resolution
Voltage
1 mV
1 mV
1 mV (@
0 … 99.999 V)
10 mV (@
100 … 120 V)
1 mV
2 mV
1 mV (@
0 … 99.999 V)
10 mV (@
100 … 120 V)
Current
1 mA
1 mA
1 mA
1 mA
1 mA
1 mA
6.2 Transient Response Time
Less than 1ms for output to recover to within 100 mV following a change in output current from full load to half load or vice
versa
6.3 Command Processing Time
Programming Commands: Maximum time for output to change after receiving APPLy and SOURce commands: <50msec
Readback Command: Maximum time to readback output MEASure? command: <100msec
Other Commands: < 50msec
6.4 Supplementary Characteristics
Output Programming Range (maximum programmable values)
LABKON P500
35 V / 14.5 A
LABKON P500
80 V / 6.5 A
LABKON P500
120 V / 4.2 A
LABKON P800
35 V / 22.5 A
LABKON P800
80 V / 10 A
LABKON P800
120 V / 6.5 A
Voltage
0 ～ 35.2 V
0 ～ 80.2 V
0 ～ 120.2 V
0 ～ 35.2 V
0 ～ 80.2 V
0 ～ 120.2 V
Current
0 ～ 14.6 A
0 ～ 6.6 A
0 ～ 4.6 A
0 ～ 22.6 A
0 ～ 10.2 A
0 ～ 6.6 A
Temperature Coefficient, ±(% of output + offset)
Maximum change in output/readback per °C after a 30-minute warm-up.
LABKON P500
35 V / 14.5 A
LABKON P500
80 V / 6.5 A
LABKON P500
120 V / 4.2 A
LABKON P800
35 V / 22.5 A
LABKON P800
80 V / 10 A
LABKON P800
120 V / 6.5 A
Voltage
30 ppm + 0.5 mV
30 ppm + 0.8 mV
30 ppm + 1 mV
30 ppm + 0.5 mV
30 ppm + 0.8 mV
30 ppm + 1 mV
Current
30 ppm + 0.2 mA
30 ppm + 0.1 mA
30 ppm + 0.1 mA
30 ppm + 0.2 mA
30 ppm + 0.1 mA
30 ppm + 0.1 mA