User manual

GOSSEN-METRAWATT 9

3.3 Activating the PSI module

To activate the PSI module, a connection to the RS-232 interface of the SECUTEST 0701S must be

made and the appliance tester must be connected to the line.

Press once (17)

Selection and execution of the functions listed in the menu is made by means of the corresponding

keys on the appliance tester.

The other operating controls and connectors should remain unchanged while the PSI module is active

so that the data traffic will not be disturbed.

The menu item "Return" causes a return to the display presented prior to activating the PSI module.

The display shows that 10 % of the storage capacity are already occupied. When 99% of the

memory are filled, the memory should be cleared and deleted (storage space for approximately

5 protocols left).

10%