User manual

6 GOSSEN-METRAWATT
1 Applications
The PSI (Printer Storage Interface) module is a special accessory for the SECUTEST 0701S appliance
tester. It is installed in the lid of the SECUTEST 0701S and fastened with two knurled screws (5).
The test results determined with the SECUTEST 0701S according to DIN VDE 0701 are directly trans-
ferred to the PSI module via the ribbon line (8) and stored there. All measured values for approxi-
mately 200 protocols (amount of one working day) can be stored in this memory.
Printing out of the test results can be made directly at the site in the form of clear hardcopy measure-
ment and test protocols including date, time and texts entered from the keyboard.
Via a serial RS-232 port (4), the stored measured values can be transferred from the SECUTEST PSI
to the PC and archived, processed there (e.g. for the preparation of invoices), or printed directly into
a pre-made form. Transmission of the data to the PC is also possible without the appliance tester.