User manual

GOSSEN-METRAWATT 33
How to change the active statistics
CLAx!<A><B><C><D><E><F><G><H>
Only one option must be given on principle!
Different changes within an instruction
The following applies:
– The following can follow a change in name:
... The type of error, separated by a semicolon
... The introduction of another statistic with 'A ... F', separated by a semicolon
... The active statistic (must always be placed at the end), separated by two semicolons
– After a change in the type of error:
... The introduction of another statistic with 'A ... F', separated by a semicolon
... The active statistic (must always be placed at the end), separated by two semicolons
– After a change in the active statistics:
... Nothing else must be specified !
Example:
Several statistic settings for different classes are to be made in an instruction:
CLA1!A=Hausger.;2;B;2;C=Kühlsch.;1;D=PC;E;2;;C
Meaning: Statistic A: Assign the name 'Household appliances', set to 'all errors'
Statistic B: Set to 'all errors'
Statistic C: Assign the name 'Refrigerator', set to 'first error'
Statistic D: Assign the name 'PC', the type of error is maintained
Statistic E: Set to 'all errors'
Statistic C: Activate