User manual

GOSSEN-METRAWATT 17
After each complete measurement, consting of safety test and function test, the measured data must
be stored so that it will be available for statistic evaluation. See "How to display, print and store pro-
tocol" on page 12. If, after the measurement, First or All is followed by a character, statistic data
has been stored for the respective class.
All following measurements expand the statistics of the class activated at the time by the additional
measured results. If new statistic data is to be recorded for an already existing class, the already
stored statistic data can be deleted, see 6.3 Delete statistic data.
6.2 Request and print statistic data
Select the Statistics menu to request statistic data:
With or move the cursor to Printout and confirm with ,
the menu Printout: is shown.
Select the class the statistic data of which you wish to see, confirm with .
The statistic data of the selected class is listed.
Moreover, in this mode you can go between the statistic data of all classes
with the aid of the or keys.