User manual

GOSSEN-METRAWATT 15

5.4 Requesting stored protocols

A list of all stored protocols can be requested at any time in order to display and print out the con-

tents of individual protocols at a later date. The first column contains the successive numbers, the

second one the ident numbers. The first 14 characters of the ident number are shown as a maxi-

mum.

Open Protocol and confirm with .

Press the Help key i (13) on the SECUTEST 0701S.

A list of the already stored protocols appears.

Select the desired protocol using the and keys and confirm with .

A maximum of 10 stored protocols is displayed. The next 10 protocols at a time are selected by leaf-

ing through with the cursor.

In the presentation of the archived protocol, an on the first bottom line informs you that no more

data can be entered here.

5.5 Print protocol

With the PSI module activated, press the key (17).

The protocol is printed with all available data, incuding the entered texts and the entered top and bot-

tom lines. Empty data fields are ignored when printing. The print procedure can be repeated at ran-

dom.

After printing, the LC display again shows the previous menu.

How to stop the printing process

Press the key (17) while the print mechanism is working.

Paper advance

Press the key (12)

The recording strip is advanced as long as you keep the key pressed.