Instructions

4
GMC-I Messtechnik GmbH METRACELL BT PRO
3 The Instrument
3.1 Scope of Delivery
Please check for completeness.
3.2 Optional Accessories
Some measurements necessitate optional accessories:
– 1 AC/DC current clamp sensor (CP1800)
– 1 METRATHERM IR BASE temperature sensor
– Replacement contact pins for the Kelvin probes
– RFID tags (frequency: 125 kHz, WorldTag™)
Please contact our product support team for further information on accessories (
14).
Values recorded and stored with a DMA 35 portable density meter from Anton Paar GmbH
can be transferred to the battery tester. Referred to the operating instructions for information
on how to use the density meter with the METRACELL BT PRO (available at http://
www.gossenmetrawatt.com). Please contact Anton Paar GmbH for any further information
concerning the DMA 35 density meter.
1 METRACELL BT PRO 2 Alligator clips (KY95-3)
4 1.2 V AA batteries 1 Set of multimeter test probes (KS29)
1 Power pack 2 Kelvin probes for 4-wire measurement
1 Rubber holster 1 BT PRO Manager
(battery tester management software)
1 Carrying strap 1 Test report / factory calibration certificate
1 Carrying case 1 Condensed operating instructions