Instructions

13
METRACELL BT PRO GMC-I Messtechnik GmbH
The following additional functions provide support when performing measurements and
evaluating measurement data:
Please refer to the full operating instructions for a complete description of how to perform the
various measurements and how to display and transmit measured values (available at
http://www.gossenmetrawatt.com).
DMA 35 (IrDA) Measurement of acid density and electrolyte temperature within a block.
Measurements are performed with the DMA 35 density meter (version 3)
from Anton Paar GmbH. Data is transferred from the sensor to the bat-
tery tester via infrared (IrDA).
DMA 35 (BT) Measurement of acid density and electrolyte temperature within a block.
Measurements are performed with the DMA 35 density meter (version 4)
from Anton Paar GmbH. Data is transferred from the sensor to the bat-
tery tester via Bluetooth
®
.
Additional
Function
Description
RFID Battery identification through the use of transponders (RFID tags)
Bluetooth – PC Transfer of measured values via Bluetooth
®
for backup and evaluation
on a computer
Bluetooth –
Headset
Transmission of acoustic signals to a headset via Bluetooth
®
Bluetooth –
DMA 35
Transmission of measured values from the DMA 35 density meter (ver-
sion 4) from Anton Paar GmbH to the battery tester via Bluetooth
®
.
IrDA – DMA 35 Transmission of measured values from the DMA 35 density meter (ver-
sion 3) from Anton Paar GmbH to the battery tester via infrared.
Measurement Description