Instructions

7
METRACELL BT PRO GMC-I Messtechnik GmbH
Function Keys
3.4 Relevant Standards
The battery tester has been manufactured and tested in accordance with the following safety
regulations:
Key Function
“Function” key
– Switch on and off
– Press briefly: Return to next higher menu level or cancel measurement
– Press and hold: End measurement or reactivate
Scroll down key “▼”
Selection of menu items or digits in downward direction.
Scroll up key “▲”
Selection of menu items or digits in upward direction.
“OK” key
–Open menus
– Execute functions
– Confirm entries
– Select digits
– Proper termination of measurements
– Press and hold: Repeat measurement
IEC 61 010-1
EN 61 010-1
VDE 0411-1
Safety requirements for electrical equipment for measurement,
control and laboratory use – general requirements
EN 60 529
VDE 0470, part 1
Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
DIN EN 61 326-1
VDE 0843-20-1
Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 1: General requirements