Data Sheet

GMC-I Messtechnik GmbH 3
METRACELL BT PRO
Portable Battery Tester for Storage Batteries
Power Supply
Rechargeable NiMH
batteries 4 ea. 1.2 V AA
(recommended: Ansmann maxE 2500 mAh)
Input Impedance
Measuring input S+ 1.6 M
Measuring input S- > 10 M
Ambient Conditions
Operating temperature +5 ... +40 C
Storage temperature -20 ... +60 C
Relative humidity Max. 75%, no condensation allowed
Elevation Max. 2000 m
Electrical Safety
Measuring category 600 V CAT III
Pollution degree 2
Protection class II per IEC 61010-1/EN 61010-1/
VDE 0411-1
Fuse link 1 ea. SIBA 600 V/10 A FF
Test voltage Test voltage at measuring connection P+
may not exceed 24 V
DC.
Electromagnetic Compatibility (EMC)
Interference emission EN 61326-1:2013, class A
Interference immunity EN 61326-1:2013
EN 61326-2-1:2013
Mechanical Design
Protection Housing: IP 40
per DIN VDE 0470 part 1/EN 60529
Table Excerpt Regarding Significance of IP Codes
Dimensions
Housing (WxHxD): approx. 9.6 x 15.4 x 3.3 cm
Weight Approx. 0.45 kg (without rubber holster)
Display LCD, monochrome, luminous
Data Interfaces
IrDA
Connection for DMA 35 V4 density meter
RFID Connection for RFID tag (World Tag™)
Bluetooth Connection for PC, headset or
DMA 35 V4 density meter
Temperature Sensor
Optional IR sensor 1 mV/1 °C
Measuring range -2.45 ... +2.45 V
Scope of Delivery
1 METRACELL BT PRO
1 Rubber holster
1Power pack
1 Set of multimeter test probes (KS 29)
1 Carrying strap
2 Alligator clips
2 Kelvin probes for 4-wire measurement
1 Carrying case
1 Battery management software
1 Test report / factory calibration certificate
Optional Accessories
1 Current clamp sensor
1 Temperature sensor
Order Information
IP XY (1
st
digit X)
Protection Against
Foreign Object Ingress
IP XY (2
nd
digit Y)
Protection Against
Water Ingress
4  1.0 mm  0 Not protected
Description Type Article No.
Portable battery tester for voltage
measurement, resistance measure-
ment for electrical internal resistance
and electrochemical resistance of bat-
tery blocks, including set of multimeter
test probes and alligator clips METRACELL BT PRO B100B
AC/DC current clamp sensor
0.5 ... 125 A, 5 ... 1250 A, 10 mV/A,
1 mV/A CP1800 Z204A
Temperature sensor METRATHERM IR BASE Z680A