User Guide
Table Of Contents
- Box Contents
- Side View/Control Buttons
- Using the Remote Control
- Soundbar Wall Mount Dimensions
- Subwoofer
- Support
- Using the HDMI ARC Input
- Using the Optical Input
- Using the MP3 Link Connection (Line In)
- Connecting to the Mains Supply
- Using the Bluetooth Operation
- Playing Audio Wirelessly
- Using the USB Operation
- Troubleshooting
Instructions Guide
Using the Optical Input
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable ( included) .
Connect the Digital Optical Audio cable to the optical output
on the audio source and to the Optical Input on the soundbar .
Press the POWER button on the soundbar or POWER button
directly on the remote control (Rem.10 ) to switch on the unit.
Press the MODE button on the remote control (Rem .18 )to
switch to Optical mode or select the Mode button on main
unit repeatedly to select the Optical mode.
Using the native controls on your connected device, make sure
the audio settings are set to PCM or Optical Audio and are
turned On. Audio from the connected audio source will now be
played through the speakers.
OPTICAL IN
OPTICAL cable
Rear view of the unit
8