MSDS
FOR CHEMICAL EMERGENCY 
During Business Hours:
 (800) 966-3458 
  Outside Business Hours: (800) 420-7186
GORILLA WOOD GLUE 
 MSDS 
Page 2 of 5
4.
 FIRST AID MEASURES 
 Eyes 
 Flush eyes gently with water while holding eyelids apart. If symptoms persist or there is visual difficulty, seek 
 medical attention. 
 Skin 
 Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical 
 attention. Launder clothing before reuse. 
 Ingestion 
 Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual 
 on the left side with the head down. Contact a physician, medical facility, or poison control center for advice 
 about whether to induce vomiting. If possible, do not leave individual unattended. 
 Inhalation 
 If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical 
 attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical 
 attention. 
5.  FIRE- FIGHTING MEASURES 
Extinguishing media 
Use water mist, alcohol resistance foam, carbon dioxide (CO2), Dry chemical. The product in its solution form 
does not burn. It will burn only after the water it contains is driven off. 
 Specific Hazards Arising from the Chemical 
None known. 
 Protective Equipment and Precautions for Firefighters 
 No special fire hazards are known to be associated with this product. For firefighting, wear a self-contained 
 breathing apparatus. 
6.  ACCIDENTAL RELEASE MEASURES 
  Personal precautions 
 Surfaces will be extremely slippery. Avoid contact with your skin and eyes. 
 Environmental precautions 
 Prevent run-off to sewers, streams or other bodies of water. If run-off occurs, notify proper authorities as 
 required, that a spill has occurred. 
 Methods for containment and cleaning up 
 Persons not wearing protective equipment should be excluded from area of spill until clean-up has been 
 completed. Stop spill at source, dike area of spill to prevent spreading, pump liquid to salvage tank.  Remaining 
 liquid may be taken up with sand, clay, earth, floor absorbent, or other absorbent material and shoveled into 
 containers. 
7. HANDLING AND STORAGE 
 Handling Procedures 
KƉĞŶƉƌŽĚƵĐƚĂŶĚǁŽƌŬŝŶǁĞůůͲǀĞŶƚŝůĂƚĞĚĂƌĞĂ͘
 Conditions for safe storage 
Store in a cool, dry, ventilated area. Do not store in direct sunlight or heat to retain the product quality. Keep 
containers closed when not in use. Protect from freezing. This product is not compatible with materials that react 
with water. 
MATERIALS SAFETY DATA SHEET 
Date Revised:  October 14, 2013 7th Edition 





