SDS

Gorilla Epoxy - Hardener SDS
Page 4 of 8
Safety Data Sheet - Gorilla Epoxy - Hardener
Date Revised: 12/9/2016
Date Issued: 06/12/2015
FOR CHEMICAL EMERGENCY:
During Business Hours: [phone] | Outside Business Hours: [phone]
Version: 1.1
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 7: HANDLING AND STORAGE
Precautions for Safe Handling
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas
with mild soap and water before eating, drinking, or smoking and again when leaving work.
Conditions for Safe Storage, Including Any Incompatibilities
Storage Conditions: Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Store away from
incompatible materials.
Incompatible Materials: Strong acids, strong bases, strong oxidizers.
Specific End Use(s) Epoxy
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer, supplier,
importer, or the appropriate advisory agency including: ACGIH (TLV), NIOSH (REL), OSHA (PEL), Canadian provincial governments, or
the Mexican government.
Bisphenol A (80-05-7)
Yukon
OEL Ceiling (mg/m³)
2.8 mg/m³
Yukon
OEL Ceiling (ppm)
0.05 ppm
Diethylenetriamine (111-40-0)
United States
ACGIH TLV (absorbed through skin)
4.2 mg/m³, 8 hours TWA
United States
ACGIH TLV (absorbed through skin)
1 ppm, 8 hours TWA
Exposure Controls
Appropriate Engineering Controls: Emergency eye wash fountains and safety showers should be available in the immediate vicinity
of any potential exposure. Provide sufficient ventilation to keep vapors below permissible exposure limit. Ensure all national/local
regulations are observed.
Personal Protective Equipment: Protective clothing. Safety glasses. Gloves. Insufficient ventilation: wear respiratory protection.
Materials for Protective Clothing: Chemically resistant materials and fabrics.
Hand Protection: Wear chemically resistant protective gloves.
Eye Protection: Chemical goggles or safety glasses.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: When effective engineering controls are not feasible, appropriate respirators shall be used. Personal
Protective Equipment must be selected by trained personnel, taking into account the type of hazardous materials it should protect
from, the nature of the work, the expected exposure, and the facial characteristics of the wearers; proper fit is of paramount
importance. Ensure the respiratory protection program meets the requirements of OSHA 29 CFR 1910.134.
Other Information: When using, do not eat, drink or smoke.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State
:
Liquid
Appearance
:
Amber
Odor
:
Not available
Odor Threshold
:
Not available
pH
:
Not applicable
Evaporation Rate
:
Not available