CA Prop 65

Waterproof Patch & Seal Liquid (Clear)
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations And According To The Hazardous Products Regulation (February 11, 2015).
05/13/2020
EN (English US)
7/12
Personal Protective Equipment: Gloves. Protective clothing. Protective goggles. Insufficient ventilation: wear respiratory protection.
Materials for Protective Clothing: Chemically resistant materials and fabrics.
Hand Protection: Wear protective gloves.
Eye and Face Protection: Chemical safety goggles.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.
In case of inadequate ventilation, oxygen deficient atmosphere, or where exposure levels are not known wear approved respiratory
protection.
Other Information: When using, do not eat, drink or smoke.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on Basic Physical and Chemical Properties
Physical State
:
Liquid
Appearance
:
Clear
Odor
:
Not available
Odor Threshold
:
Not available
pH
:
Not available
Evaporation Rate
:
Not available
Melting Point
:
Not available
Freezing Point
:
Not available
Boiling Point
:
Not available
Flash Point
:
Not available
Auto-ignition Temperature
:
Not available
Decomposition Temperature
:
Not available
Flammability (solid, gas)
:
Not applicable
Lower Flammable Limit
:
Not available
Upper Flammable Limit
:
Not available
Vapor Pressure
:
Not available
Relative Vapor Density at 20°C
:
Not available
Relative Density
:
Not available
Specific Gravity
:
Not available
Solubility
:
Not available
Partition Coefficient: N-Octanol/Water
:
Not available
Viscosity
:
Not available
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity: Reacts with water and moisture in air liberating methanol.
10.2. Chemical Stability: Stable under recommended handling and storage conditions (see section 7).
10.3. Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
10.4. Conditions to Avoid: Direct sunlight, extremely high or low temperatures, and incompatible materials.
10.5. Incompatible Materials: Oxidizers. Amines. Water. Halogens.
10.6. Hazardous Decomposition Products: Not expected to decompose under ambient conditions.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on Toxicological Effects - Product
Acute Toxicity (Oral): Not classified
Acute Toxicity (Dermal): Not classified
Acute Toxicity (Inhalation): Not classified