SDS
Product SDS
Page 4 of 11
Safety Data Sheet – Waterproof Patch and Seal
Spray- Black
Date Revised: 02-12-2020
Date Issued: 01-08-2020
FOR CHEMICAL EMERGENCY:
During Business Hours: (800) 966-3458 | Outside Business Hours: (800) 420-7186
Version: 1.1
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations and according to the Hazardous
Products Regulation (February 11, 2015).
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed
:
Hazardous waste due to potential risk of explosion. Pressurized container: Do not pierce or
burn, even after use.
Precautions for safe handling
:
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. Do not spray on an open flame or other ignition source. Obtain special instructions
before use. Do not handle until all safety precautions have been read and understood. Avoid
breathing mist/vapors/spray. Use only outdoors or in a well-ventilated area.
Hygiene measures
:
Do not eat, drink or smoke when using this product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Proper grounding procedures to avoid static electricity should be followed.
Storage conditions
:
Keep only in the original container in a cool, well ventilated place away from : Do not expose to
temperatures exceeding 50 °C/ 122 °F. Keep in fireproof place. Keep container tightly closed.
Incompatible products
:
Strong bases. Strong acids.
Incompatible materials
:
Sources of ignition. Direct sunlight. Heat sources.
Storage area
:
Store in a well-ventilated place.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Asphalt (8052-42-4)
ACGIH
ACGIH TWA (mg/m³)
0.5 mg/m³ Inhalable fraction
NIOSH
NIOSH REL (ceiling) (mg/m³)
5 mg/m³
Methyl alcohol (67-56-1)
ACGIH
ACGIH TWA (ppm)
200 ppm
ACGIH
ACGIH STEL (ppm)
250 ppm
OSHA
OSHA PEL (TWA) (mg/m³)
260 mg/m³
OSHA
OSHA PEL (TWA) (ppm)
200 ppm
IDLH
US IDLH (ppm)
6000 ppm
NIOSH
NIOSH REL (TWA) (mg/m³)
260 mg/m³
NIOSH
NIOSH REL (TWA) (ppm)
200 ppm
NIOSH
NIOSH REL (STEL) (mg/m³)
325 mg/m³
NIOSH
NIOSH REL (STEL) (ppm)
250 ppm
NIOSH
US-NIOSH chemical category
Potential for dermal absorption
Carbon black (1333-86-4)
ACGIH
ACGIH TWA (mg/m³)
3 mg/m³ (inhalable fraction)
OSHA
OSHA PEL (TWA) (mg/m³)
3.5 mg/m³
IDLH
US IDLH (mg/m³)
1750 mg/m³
NIOSH
NIOSH REL (TWA) (mg/m³)
3.5 mg/m³
0.1 mg/m³ (Carbon black in presence of Polycyclic
aromatic hydrocarbons)