SDS
FPOFPO
DIRECTIONS:
For best results, apply the tape to a clean surface at room temperature.
1. Keeping liner on tape, cut tape to desired size. Tape size should be larger than the repair area, extending beyond all edges.
2. Remove the release liner and place tape over desired repair area. Tape cannot be repositioned once applied.
3. Rub entire surface of the tape aggressively, especially the edges.
STORAGE: Store tape on the top and bottom disc at room temperature. Edges of tape may be sticky.
SERVICE TEMP: -70°F-200°F
Performance will be dependent on surfaces & conditions. Surfaces must be clean, smooth and non-porous. Water must be pressed out
from underneath tape. Not for use on seams, applications under pressure, or automotive applications under the hood. May not adhere to
silicone or water-repellent materials. Do not use to hang. Permanent: may damage surface if removed.
© 2019 THE GORILLA GLUE CO.
CINCINNATI, OH 45241
1-800-966-3458
www.gorillatough.com
XXXX
NON-YELLOWING
WHITEWHITE
14 in
3.75 in

