Owner Manual
Table Of Contents
- 2600 Interlocking Sandbox - Opening Pages
- 2600 Hardware
- 2600 Wood List and Accessories
- 2600 - Steps
- 2600 - Step 01
- 2600 - Step 02
- 2600 - Step 03
- 2600 - Step 04
- 2600 - Step 05
- 2600 - Step 06
- 2600 - Step 07
- 2600 - Step 08
- 2600 - Step 09
- 2600 - Step 10
- 2600 - Step 11 Option 1 Umbrella Bracket
- 2600 - Step 12 Option 1 Umbrella Mast Installation
- 2600 - Step 13 Option 1 Umbrella Completion
- 2600 - Step 14 Option 2 Sandbox Cover
STEP 7: SANDBOX BOARD 3
1: MEASURE FROM THE INSIDE FACE OF THE SANDBOX BOARD 17-1/8" AS SHOWN. PLACE
SANDBOX BOARD 3 INTO POSITION. THE TOP OF THE BOARD SHOULD BE FLUSH TO THE TOP OF
SANDBOX BOARD 2 OR SLIGHTLY LOWER THAN SANDBOX BOARD 2. DRIVE THE #6 X 1-1/2"
SCREWS FROM THE INSIDE OF THE SANDBOX BOARDS INTO SANDBOX BOARD 3.
2: REPEAT THIS PROCESS FOR THE OTHER THREE SANDBOX BOARD 3 PIECES.
SANDBOX BOARD 3
#6 X 1-1/2"
LOWER THAN SANDBOX BOARD 2.
SCREW
SANDBOX BOARD 3
SANDBOX BOARD 3
SANDBOX BOARD 3
**IMPORTANT**
THE TOP OF SANDBOX BOARD 3 MUST BE FLUSH TO
THE TOP OF SANDBOX BOARD 2 OR SLIGHTLY
SANDBOX BOARD 2
1
17
8
17
8
"
"
1
8
"
17
1
17
1
8
"
17