Installation & Assembly

TOOLS REQUIRED:
1-PHILLIPS HEAD SCREWDRIVER
1-14mm WRENCH or ADJUSTABLE WRENCH
1: REMOVE THE ACORN NUT FROM THE TOP OF THE BELL.
2: PLACE THE HORSESHOE BASE ONTO THE SURFACE WHERE YOU WISH TO MOUNT THE DINNER BELL.
FASTEN THE HORSESHOE BASE WITH THE PHILLIPS HEAD SCREWS PROVIDED.
3: PLACE THE THREADED ROD THROUGH THE BELL THEN THROUGH THE HOLE IN THE HORSE SHOE BASE.
PLACE THE ACORN NUT ONTO THE THREADED ROD AND TIGHTEN IT WITH A 14mm WRENCH OR AN
ADJUSTABLE WRENCH.
(09-0001) DINNER BELL INSTRUCTIONS
THREADED ROD
HORSESHOE BASE
BELL
PHILLIPS HEAD
SCREWS PROVIDED
**FOR CHILDREN AGES 3-11**
**FOR RESIDENTIAL USE ONLY**
ACORN NUT